{tab Overview}

Lifting columns

Thomson Telescopic Lifting Column is another product innovation from Danaher Motion. It will make the utilisation of linear motion products easier. It has all the hallmarks that you would expect from a Thomson actuator; quality, easy installation and long, trouble free life. Designed to suit many applications, the lifting column will fit perfectly into all kinds of medical, disability, rehabilitation and health and fitness equipment.

Performance Specifications

• High moment load capability
• Anodised aluminium profiles with 20 μ (anodisation and surface tolerance class
• Very favourable ratio between the stroke and the retracted length
• Telescopic screw drive
• IP 44 protection degree
• Maintenance free
• Speed up to 19 mm/s
• Integrated load holding brake
• End plates in zinc plated steel
• CE approved
• Quiet operation, suitable for domestic use
• Aesthetic design
• Load up to 2000 N/li>
• Very low retracted height
• Dynamic braking
• Low weight
• Self supporting
• Smooth operation
• EMC recognised according to medical equipment standards
• Simple to install
• Built in end of stroke limit switches

{tab Specifications}

{/tabs}

{tab Apžvalga}

Electric linear actuator Electrak 10 (LA10)

The Electrak 10 (LA10) actuators incorporate a screw drive system for applications requiring maximum load capacity. A specially designed anti-back driving brake holds tension or compression loads in position when the actuator is not in use. This holding brake activates automatically when the actuator is turned off and will continue to hold the load in position without power consumption until the actuator is started.

Performance Specifications

• Input Voltages – 12, 24, 36 VDC;
• Stroke Length – 50-600 mm;
• Dynamic Load – up to 6800 N;
• Static Load – up to 18000 N;
• Speed – up to 60 mm/s;
• Full load duty cycle @ 25ºC – 25%;
• IP65;
• Auto reset thermal switch for motor protection;
• Acme Screw or Ball Screw;
• Maintenance free;
• Options – potentiometer, manual override, limit switches.

{tab Specification}

{/tabs}

{tab Ovierview}

Electric linear actuator Electrak 14 (LA14)

Electrak 14 (LA14) is based on the Electrak 10 design, which incorporates a screw drive system for applications requiring maximum load capacity, robust performance, and long life. Its additional benefits offer the a built-in anti rotation mechanism and an aluminium cover tube. The aluminium cover tube has T-slots that can be used for mounting and also accepts magnetic sensor to be fitted along two sides of the tube.

Performance Specifications

• Input Voltages – 12, 24, 36 VDC;
• Stroke Length – 50-600 mm;
• Dynamic Load – up to 6800 N;;
• Static Load – up to 18000 N;
• Speed – up to 60 mm/s;
• Full load duty cycle @ 25ºC – 25%;
• Operating temperature – -25 - +65 0C;
• IP65;
• T-slot grooves in the cover tube for magnetic sensors;
• Acme Screw or Ball Screw;
• Maintenance free.

{tab Specifications}

{/tabs}

{tab Ovierview}

Electric linear actuator Electrak 24 (LA24)

The Electrak 24 (LA 24) actuator is designed for rugged and robust applications. With both ball and acme screw drive options and coupled through a gear train to an AC motor, these actuators feature strong and reliable quality construction with an aluminium cover tube and T-slots for position sensor mounting.

Performance Specifications

• Input Voltages – 1 x 230 VAC, 3 x 400 VAC;;
• Stroke Length – 50-600 mm;
• Dynamic Load – up to 6800 N;
• Static Load – up to 18000 N;/li>
• Speed – up to 60 mm/s;
• Full load duty cycle @ 25ºC – 25%;
• Operating temperature – -25 - +65 0C;
• IP45;
• Auto reset thermal overload motor protection;
• Acme Screw or Ball Screw;
• Holding brake on ball screw models;
• Maintenance free;
• Options – potentiometer, hand wind, anti-coast brake.

{tab Specifications}

{/tabs}

{tab Ovierview}

Electric linear actuator Electrak PPA-DC

Electrak PPA-DC Performance Pak Actuators are strong, heavy duty units able to run at higher duty cycles. Incorporating a highly efficient ball screw drive system, these actuators are designed for mobile applications with a wide selection of options and standard trunnion mounting.

Performance Specifications

• Input Voltages – 12, 24, 36 VDC;
• Stroke Length – 100-900 mm;
• Dynamic Load – up to 6670 N;
• Static Load – up to 13350 N;
• Speed – up to 30 mm/s;
• Full load duty cycle @ 25ºC – 30%;
• Operating temperature – -25 - +65 0C;
• Auto reset thermal overload motor protection;
• IP52;
• Holding brake;
• Maintenance free;
• Options – hall effect positioning sensors, end of stroke limit switches, encoder feedback, protective bellows, manual override.

{tab Specifications}

{/tabs}

{tab Ovierview}

Electric linear actuator Max Jac

The new Max Jac® linear actuator is one of the most rugged actuators you can find on the market today. The Max Jac is built to perform in harsh environments and materials, such as fertilizers, mud, sand, high pressure water, slush, salt water, snow, heat or heavy vibrations - and requires little or no maintenance and service.

Features:

• Long Life
• High speed
• High reliability
• High efficiency
• Small envelope
• Minimal backlash
• Vibration resistant
• Duty cycle up to 100%
• Short total length versus stroke
• High degree corrosion protection
• High accuracy position feedback options

{tab Specifications}

{/tabs}

{tab Ovierview}

Electric linear actuator WhisperTrak

WhisperTrakTM Linear Actuators are the newest addition to our well-known electric linear actuator family. WhisperTrakTM linear actuators are designed to incorporate features that enable machine builders the greatest flexibility in a variety of applications. This new actuator sets a new standard for personal mobility, medical, rehab, office and domestic applications. It is small, quiet and washdown-proof.

Feature Highlights:

• High Quality
• Compact and light
• Plug&play" installation
• Maintenance free
• Ultrasonic welding of enclosure provides high degree of sealing
• Washdown proof during operation
• Submersible during non-operation
• Mounting adapters turned 90°
• IP67 environmental protection class
• CE (EN60601-1) and UL (UL60601-1) certificates

{tab Specifications}

{/tabs}

{tab Overview}

Actuator Electrak 1 (LA1)

The Electrak 1 (LA1) actuator is completely self-contained and sealed for indoor and outdoor use. Functionally, these models are easily interchanged with comparably sized hydraulic or pneumatic cylinders. Used on intermittent duty applications Electrak 1 actuators provide consistent, repeatable performance in the most rigorous operating conditions including extreme temperatures and humidities.

 Performance Specifications

• Input Voltages – 12, 24, 36 VDC;
• Stroke Length – 20-150 mm;
• Dynamic Load – up to 340 N;
• Static Load – up to 1300 N;
• Speed – up to 75 mm/s;
• Full load duty cycle @ 25 ºC – 25%;
• IP65;
• Operating temperature - -25 - +65 0C;
• Auto reset thermal switch motor protection;
• Aluminum/zinc corrosion resistant housing;
• Maintenance free.

{tab Specifications}

{tab Applications}

{/tabs}

{tab Overview}

Actuator Electrak 5 (LA5)

The Electrak 5 (LA5) actuator is designed for intermittent duty applications. Consisting of a highly efficient ball bearing screw drive system coupled through a gear train to an AC motor, these actuators feature robust, strong, and reliable quality construction with a stainless steel extension tube and slip clutch to protect the maintenance free unit from overload.

Performance Specifications

• Input Voltages - 1 x 230 VAC, 3 x 400 VAC;
• Stroke Length – 100-600 mm;
• Dynamic Load – up to 6800 N;
• Static Load – up to 18000 N;
• Speed – up to 60 mm/s;
• Full load duty cycle @ 25ºC – 25%;
• Operating temperature – -25 - +65 0C;
• IP45;
• Heavy duty motor with thermal switch;
• Acme Screw or Ball Screw;
• Maintenance free;
• Options – Acme screw anti coast brake, potentiometer, manual override, limit switches.

{tab Specification}

{/tabs}